ProtectaClear Protective Coating – Jewelry Protection for Copper, Bronze, Brass, Silver from Tarnish, Oxidation and Corrosion 4 oz. can by Forgeron

19,95 USD

Copper, brass and silver fashion jewelry is beautiful but it is annoying to keep polished. And for some individuals, copper jewelry can make skin darken or discolor. ProtectaClear is a virtually clear, clear protective covering that will solve these issues. ProtectaClear is a clear, safety finish that is easy to apply however is tough enough to secure precious jewelry and is safe for wear against skin. Can be found in a 4 oz. can that will safeguard about 25 square feet of metal. Every order includes: Nitrile Gloves, Sponge Applicator, and Complete Written Guidelines.

How is ProtectaClear used? ProtectaClear can be applied by dipping, spraying or repainting on the finishing. The approach of application is a personal choice.

* To get rid of the insert, hold the can to prevent the contents from spilling. Use a screwdriver and tap through the metal insert. The metal insert will bulge.

ProtectaClear is a clear, safety coating that is simple to use however is difficult enough to safeguard jewelry and is safe for wear against skin. ProtectaClear is almost invisible as soon as applied, dries rapidly and will seal and safeguard jewelry from tarnish, oxidation, and deterioration. ProtectaClear can be gotten rid of with solvents if wanted.

ProtectaClear will protect the copper along with the skin of the wearer from staining. ProtectaClear is almost clear and is utilized on polished copper and even copper with patina on it. ProtectaClear is difficult and scratch resistant, once it is cured.

Is ProtectaClear safe on precious jewelry to be used on skin? Yes, ProtectaClear is safe on skin and ares food safe once it is cured. ProtectaClear can use up to 4 days to treat or it can be speed treated by putting metal that has been layered and dried to touch in a low temperature level oven (180degrees F or less) for at least an hour.

Can ProtectaClear be made use of on Filigree Jewelry? Yes, you can dip the fashion jewelry or make use of an aerosol of ProtectaClear to coat filigree jewelry. If the filigree is really tight, you can just blow it carefully to break the surface area stress of the finish so it abides by the metal. You can likewise use a can of air to blow the excess from chains or other jewelry.

Can ProtectaClear be made use of on Filigree Precious jewelry? Yes, you can dip the fashion jewelry or make use of an aerosol container of ProtectaClear to coat filigree precious jewelry. If the filigree is very tight, you can simply blow it carefully to break the surface area stress of the finish so it abides by the metal.

Can ProtectaClear be utilized on Stones or Minerals? Yes, ProtectaClear can be used on stones and minerals and will improve the appearance. Nevertheless, fragile gems like pearls or opals must not be covered with anything. Also, covering soft plastic beads or non-metalic stringing product is not recommended.

Can ProtectaClear be eliminated from stones or minerals? Yes, ProtectaClear can be eliminated if necessary with a Q-tip using a solvent such as Xylene.

SHIPPING: Delivered through USPS by first class mail with tracking (in the United States). 3-5 day delivery time estimate, longer for global.

COMBINED SHIPPING: Contact me for integrated shipping rates. I prefer to see to it you do not pay too much for shipping and will see to it to do my finest to save you your tough made dollars! I will reimburse any overage over a dollar back to you through PayPal.

Remember I am everything about education and so kindly contact me if you have any questions.

Please have a look at my other shop where I have my jewelry designs:
www.charouellette.etsy.com

Можно buy on Etsy for Forgeron